Low-cost half-only scale platform (aluminium)

[Andreas]

Sophisticated and simple design by @clemens for measurement on one side of the beehive: Two aluminium 90° profiles 50x50x5, two spacers and one Bosche H30A single point load cell. See also Bee Scale Prototype 2.

Unassembled

Assembled

Mounted

[Andreas]

Is this a kind of a derivative of your design, @Clemens?
https://beelogger.de/?page_id=196784

Open Hive "Scale Bar" for Single Side Weighting

This is the low cost weight module of the Open Hive Scale. Due to the single side weighting only it is cheap but perhaps not as accurate as a scale that weights the whole hive. 2x aluminium angle profile, 50 x 50 x 5 x 340 / 450 / 500 (accordingly to your hive type) 2x small spacer plate, 35 x 33 x 5 8x screws, Allen key, countersunk head, M6 x 30 1x load cell, Bosche H30A (we used the 200 kg variant, but 100 kg will be sufficient also) Drilling Templates l-profil-50x50x5_v0.3b_340mm_bohrv…

[clemens]

Yes, a bit like Waage für TBH / Bienenbox / andere Trogbeute but I think my version is a bit better, don’t like the thin U profiles and the non countersink screws.