Inbetriebnahme und Weiterentwicklung der Firmware für Arduino (Bienenwaage 2.0 und 5.0)

Andreas · May 3, 2020, 8:48pm

Stimmt das denn überhaupt, @Stefan? Ist es egal, was in MQTT_USERNAME bzw. MQTT_PASSWORD definiert ist?

hiveeyes/arduino/blob/0.17.0/node-esp8266-generic/node-esp8266-generic.ino#L135-L154


      
          // The address of the MQTT broker to connect to
          #define MQTT_BROKER         "swarm.hiveeyes.org"
          #define MQTT_PORT           1883
          
          // A MQTT client ID, which should be unique across multiple devices for a user.
          // Maybe use your MQTT_USERNAME and the date and time the sketch was compiled
          // or just use an UUID (https://www.uuidtools.com/) or other random value.
          #define MQTT_CLIENT_ID      "xxxxxxxx-yyyy-xxxx-yyyy-zzzzzzzzzzzz"                   // Hier eigenen Werte eintragen
          
          
          // The credentials to authenticate with the MQTT broker
          #define MQTT_USERNAME       "DeinLoginName"                                            // Eigenen Login Daten bei den netten Team von Hiveeyes via hello@hiveeyes.org anfragen.
          #define MQTT_PASSWORD       "DeinKennwort"
          
          // The MQTT topic to transmit sensor readings to.
          // Note that the "testdrive" channel is not authenticated and can be used anonymously.
          // To publish to a protected data channel owned by you, please ask for appropriate
          // credentials at https://community.hiveeyes.org/ or hello@hiveeyes.org.
              
          #define MQTT_TOPIC          "hiveeyes/xxxxxxxx-yyyy-xxxx-yyyy-zzzzzzzzzzzz/spielwiese/node-1/data.json"