Andreas
November 1, 2019, 12:31am
4
Just two little updates on this.
Andreas
February 20, 2020, 6:01pm
6
A short excerpt which sparked my interest:
But the best feature about this new microcontroller is the ULP co-processor based on the RISC-V architecture. That should mean very low power consumption and more processing power compared to the one in the ESP32. The ESP32-S2 is also capable of dynamically turning off the Wi-Fi transceiver when not in use to save power. This allows for low power even with the Wi-Fi “on” pinging the router.
The datasheet talks about a low power mode of just 5uA (!!) and 24uA at 1% duty cycle. That means you can finally have a battery-operated Wi-Fi-enabled device — something not really feasible with previous versions (you don’t want to change batteries every week, do you?).
All about the ESP32-S2 by Espressif Systems from Adafruit
Limor Fried und einer ihrer Kollegen von Adafruit geben einen kleinen Überblick über den neuen ESP32-S2 Chip von Espressif. CircuitPython wird den Chip aufgrund des nativen USB-Supports über TinyUSB ebenfalls unterstützen.
Now, after being announced in September of 2019, the ESP32-S2 is finally making it into hobbyist’s hands . On the face of it, the S2 seems less capable, with a single core and no Bluetooth or Ethernet. But with a much faster CPU, scads more GPIO, more ADCs, a RISC-V co-processor, native USB, and the promise of very low current draw, it could be that the ESP32-S2 proves to be even more popular with hobbyists as it becomes established.
Weiterführende Links
Das bedeutet, dass die Programmierung (Upload der Firmware) über USB DFU - The USB Device Firmware Upgrade standard - Openmoko per dfu-util erfolgen kann.
A nice comparison from Andreas Spiess